Search
+43 1 271 660 095 Mon - Fri 3 p.m - 6 p.m 850 m2 Showroom
Current filter
connects a coin mech to the SMART Hopper for ccTalk communications
This token A16 from brass is especially applicable for electronic coinvalidators and provide in combination with them a high securitry. Because of security reason we can only accept token orders by companies, and/or by showing a proof of ownership (identity card, registration papers etc.). No sale to private customers.
Interface cable RM5 CC-talk to Smart Hopper
The CC-Talk Hub Interface enables you to connect different devices with CC-Talk protocol to the RS232 interface of your computer.
Connect PDAs, digital cameras, modems, and other serial devices to your USB port with this high performance USB to Serial adapter.
Interface PCB Rowe Ami for connection of electronic coin validator
Wake UP sensor for electronic coin validator with battery operation.
10 conductor ribbon cable with 2x5 pin female connector with strain relief at both ends.
This testbox was developed in order to test quickly and reliable electronic coinvalidators as well as banknote validators.
With this cable following banknote reader NV9, NV10, BV20 and BV100 with puls mode can be connected to the relay board.
16 conductor ribbon cable with 2x8 pin female connector with strain relief at both ends.
Ribbon cable 10 conductor with two junction plug to connect externial devices like testbox, coin meter, separator, a.s.o.
With this relay pcb you can simply realize different applications with an electronic coin validator. Depending on configuration of the electronic coin validator you can contact potential free both relays contacts for timing circuits, expenditures for impulse, sales procedures use etc. with two prices.
10-pin ribbon cable for RM5 coin acceptor changes outputs 2 to output 3. Required to be compatible with NRI or Alberici coin acceptors.
10-pin ribbon cable for Cyberdine Darts and RM5 coin acceptor.
This cable is replaced necessarily if a common coin validitor (parallel coin exit ) by an RMX20.
Cable connection with integrated RS232 interfaces converters. These cables is required for the connection of a RM5 to the PC.
Interface cable connects RM500 CC talk coin validator with the RS232 interface of your PC's. The current supply for the coin validator is supplied by way of the external cable.
Cable with integrated RS232 converter between CC-Talk HUB (art.no.9930500503) and PC RS232
4 conductor harness with plug, to connect the RM5XCC Talk with the CC Talk hub art.no.: 9930500503
with this interface you can connect all coin validator RM5 variants which use the exit 2 and 3 for the output signal.
+12V at Pin No. 10
Information about amount, time assets, remaining amount etc. is indicated to elements depending upon configuration of the electronic Coin validator or key system with 14 mm red LED 7-Segment.
Supply cable for RM5 USB coin validator
Cable for RM5 USB coin validatorr
Interface for Soocertable with electronic coinvalidator RM5
Cable for RM5F T Timer und Vending
{{.}}
{{{.}}}